Monday, December 12, 2011

2' Jump Start Grow Light System

!±8± 2' Jump Start Grow Light System


Rate : | Price : | Post Date : Dec 13, 2011 00:30:21
Usually ships in 1-2 business days

Discount Mouse Exterminators Buy Raytek Infrared Bissell 7920 Free Shipping

Wednesday, November 16, 2011

Hydrofarm FLC0125D Fluorescent Grow Light System

!±8± Hydrofarm FLC0125D Fluorescent Grow Light System

Brand : Hydrofarm | Rate : | Price : $76.19
Post Date : Nov 16, 2011 10:21:05 | Usually ships in 1-2 business days


  • Garden indoors year-round
  • Get an early start on those tomatoes next spring
  • Grow flowers, herbs and much more
  • Includes a 125 watt fluorescent bulb that will serve a 3' x 3' growing area
  • Easy to install: just hang it up and plug it in

More Specification..!!

Hydrofarm FLC0125D Fluorescent Grow Light System

Chez Lounge Chair Coupon

Monday, November 7, 2011

Using a Lighting Reflector in Hydroponics

!±8± Using a Lighting Reflector in Hydroponics

It is very important to use a light reflector in your hydroponics garden if you would like to get the most out of your grow lamp. A light bulb will admit light in 360°. If you do not have a reflector above your bulb these light rays will be wasted because light will be beaming out in all directions around for your plants and not on your plants. What you really need is a way of focusing the light beams at 360° radius back onto your plants. That's exactly what the light reflector does and why it's important to have one. A light reflector will take all the light from the bulb and once installed around the top of the light reflector will bounce light down to your garden. This is called out of bounce light. This can make your lights much more effective because now a lot less of those light rays are to be wasted by going in directions not needed. You never want to run the lights without out a good reflector.

When looking for a hydroponics grow lights reflector take a look at name brands like a light Sunlight Supply and Hydrofarm. They are both known to make high-quality reflectors ranging through entry level all the way up to grow commercial gardening. If you can afford it definitely get an air cooled reflector that will keep your lights a lot cooler than non-air cooled reflectors like Batwings. Keeping these big lights cool is definitely huge advantage when it comes to hydroponics. But whatever you do definitely by a reflector being a non-air cooled reflector or an air cooled reflector as long as you have bounce light on their you will have a very effective grow using your HID lighting system.

There is a really great tutorial on the Homegrown Hydroponics website about selecting the proper light wattage for the room you are growing in. If you're considering growing with hydroponics [http://www.homegrown-hydroponics.com] for the first time and you are unsure what the proper wattage bulb will be then check out the video on the Homegrown Hydroponics website in their video section. That should clear up a lot so you can make sure that you have the right light to get the most yield and not overpower your plants too much light.


Using a Lighting Reflector in Hydroponics

Usmc Kabar Coupon

Tuesday, November 1, 2011

Councilmember Larry Reid University of Cannabis graduate

Great Deals Bowflex Dumbbells Purchase Samsung T260hd

Saturday, October 29, 2011

How to Know If Your Metal Halide Ballast is Bad - Tips and Tricks

!±8± How to Know If Your Metal Halide Ballast is Bad - Tips and Tricks

Although Metal Halide lighting is very effective for many different applications, there are some things that you just have to keep in mind to ensure that you're able to get the lighting solutions that you need. Metal halide options are seemingly endless and can serve just about any need that you have when it comes to various types of lighting. It doesn't matter whether you use them for growing, aquarium lighting, or any other application because they can be a great source of light. They can be very effective for your lighting needs, but it can also prove to be quite troublesome if you run into problems. Fortunately, there are some easy tips for how to know if your metal halide ballast is bad.

Obviously, when your light fixture stops working, you have a problem. Determining if the problem is just a burnt out bulb or if the ballast is bad can be a little tricky. If you have access to another light fixture that will accept the same bulbs, attempt to use them in that fixture, but only if they are rated to hold the type of bulb that you have. Otherwise, you risk shorting out another ballast, making the process more trouble than it's worth. If you don't have access to another fixture, look at the bulbs themselves. When they burn out, they will usually be dark on the end, showing their wear. However, if the metal halide ballast is burnt out, the sockets might have a dark, burned, or otherwise abnormal appearance.

You can try replacing the lamps, because even the more expensive metal halide bulbs will be more affordable than buying a new metal halide ballast kit when you don't know what the issue is. If the new bulbs don't work in the fixture, then it needs to be replaced. If they do work, the problem is solved. It's critical that you take the time to check this out, because attempting to use a bad ballast can be an electrical hazard of huge proportions. Always make sure that you unplug your it before messing with it. This is critical. If it is not bad, or even if it has a short, you're risking serious trouble if you try to fix it or see what's wrong while it's still getting power.

It doesn't matter if the fixture is turned off because as long as it is plugged it, it's getting power. Just unplug it before you do anything and you'll be fine. If you end up having to replace your metal halide ballast, don't despair. If there is a manufacturer's defect, you need to know what is wrong. If you just did something with it that you shouldn't have, you will know that too. Aside from serious malfunctions or user error, your fixture should last for a reasonably long time without trouble. Make sure that you're using the right bulbs that the ballast is rated for, and that there is enough space for the heat to dissipate so that the bulbs don't overheat the fixture and cause it to short out.


How to Know If Your Metal Halide Ballast is Bad - Tips and Tricks

Blendtec Total Blenders Compare

Wednesday, October 26, 2011

Grow Lights - High Pressure Sodium HPS

!±8± Grow Lights - High Pressure Sodium HPS

Some of the most popular grow lights for indoor gardening are HID lights. The two best HID lights for growing plants are MH (Metal Halide) and HPS (High Pressure Sodium). For this article we will focus on the HPS or High Pressure Sodium lights.

High Pressure Sodium lights are usually used during the flowering stage of a plants grow cycle. This is because the HPS light bulb emits a spectrum that is red, yellow, and orange in color. This is going to be the light spectrum that mimics most closely the light that is produced by the sun later in the year, like fall time. This makes the HPS light ideal for plants that are in their fruiting and flower stage.

High Pressure Sodium HPS lights come in many different sizes. The most popular wattage's are 150w, 250w, 400w, 600w, and 1000w. You can find HPS lights in other sizes but the ones mentioned above are the most widely used. All HPS Lighting systems come with a ballast and cord set to run the light bulb. You will probably want to add a hood so that you can concentrate the light downward toward your plants.

When you are going to buy a HPS lighting system you will want to make sure that you get it from a reputable manufacturer. Sunlight Supply, HydroFarm, Sunleaves, and Lumatek are some of the good manufacturers. It is worth the extra money to get a HPS lighting system made by one of these guys, most also come with at least a 5 year warranty. I have personally used all of these brands, and although they have their advantages and disadvantages they are all solid products that the manufacturers back up with a warranty. You will never want to mix and match parts for a lighting system, it is very dangerous to do so and could cause a fire.

There are two types of ballast that will run a HPS lighting system, magnetic and digital. The magnetic ballasts are cheaper and more reliable, but they are bigger, nosier, and emit a good amount more heat. These have been the standard in the indoor horticulture industry for decades. The digital HID light ballast is relatively new to the market. People like them because they are smaller, quieter, and create less heat. That all sounds great, but keep in mind that they also have a much higher failure rate, and don't work well with some types of grow bulbs out on the market today. Mainly Hortilux bulbs have had problems with the digital ballast and more specifically the 1000w has had the most. I was told recently that Hortilux is finally going to adapt their bulbs to work with digital ballasts. When I stop running into people that are blowing up their Hortilux bulbs in digital ballasts I will let you guys know. For now be aware that this is a potential problem and talk with your local hydroponics/indoor gardening retailer to find out the latest information before spending over 0 on a bulb that will blow up on you. I would say that as long as you go with a brand from a reputable manufacturer that has a warranty either one is fine it's personal choice and budget that will play most on your decision.

Expect to change your HPS light Bulbs every 9 to 12 months. You may hear HPS bulbs can last up to two years, although this is correct in the sense that they will continue to emit light for two years, lumen degradation starts after only 6-9 months. So in order to get the maximum growing power from your bulbs you will need to change them out at least once a year.

Happy growing!


Grow Lights - High Pressure Sodium HPS

New Viewsonic Pjd5112


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。







Sponsor Links